Radio
Dual-radio dual-band
Radio 1: 2.4G 11n: 2×2 MIMO
Radio 2: 5G 11ax: 4x4 MIMO
Protocol: Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac
Operating Bands
802.11b/g/n ：2.4G ~ 2.483GHz
802.11a/n/ac/ax ： 5.150～5.350GHz，5.47～5.725GHz，5.725～5.850GHz (vary depending on different countries)
Spatial Streams: Up to 6: 2×2:2 in 2.4GHz , 4×4:4 in 5GHz
Max Throughput
Maximum throughput of 2.4G: 400Mbps
Maximum throughput of 5G: 4.8Gbps
Maximum throughput per AP: 5.2Gbps
Modulation
OFDM：BPSK@6/9Mbps，QPSK@12/18Mbps，16-QAM@24Mbps，64-QAM@48/54Mbps
DSSS：DBPSK@1Mbps，DQPSK@2Mbps，and CCK@5.5/11Mbps
MIMO-OFDM：BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM OFDMA (up to 1024-QAM)
Receiver Sensitivity
11b：-96dBm（1Mbps），-93dBm（5Mbps），-89dBm（11Mbps）
11a/g：-91dBm（6Mbps），-85dBm（24Mbps），-80dBm（36Mbps），-74dBm（54Mbps）
11n：-90dBm（MCS0），-70dBm（MCS7），-89dBm（MCS8），-68dBm（MCS15）
11ac HT20：-88dBm（MCS0）, -63dBm（MCS9）
11ac HT40：-85dBm（MCS0）, -60dBm（MCS9）
11ac HT80：-82dBm（MCS0）, -57dBm（MCS9）
11ax HT80：-82dBm（MCS0）, -57dBm（MCS9）, -52dBm（MCS11）
11ax HT160：-80dBm（MCS0）, -49dBm（MCS11）
Antenna
Integrated antenna design
Antenna Gain
2.4G: 3dBi
5G: 3dBi
Service Ports: 3 10/100/1000M Ethernet ports (The LAN1 Port supports PoE in, LAN3 Port supports LAN & IoT module expansion with PoE out)
Management Port: 1 console port
USB: 1 USB 2.0 port
IoT Capability: BLE
Reset Button: Support
Anti-theft Lock: Support
LED Indicator: 1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.)
Transmit Power: ≤100mw（20dBm） (vary depending on different countries)
Adjustable Power: 1dBm
Power Supply
Local power supply (DC 48V/1A) (DC Power adapters should be purchased from third-party vendors separately if needed.)
PoE+ (802.3at)
PoE (802.3af) – Not recommended: 5G radio is degraded to 2x2 MIMO, and the PoE out of the LAN3/ IoT port is disabled
Power Consumption: ＜25.4W
